Think You're The Perfect Candidate For Doing Repairs To Upvc Windows? Answer This Question
Think You're The Perfect Candidate For Doing Repairs To Upvc Windows? Answer This Question
Blog Article
Repairs to uPVC Windows
uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.
It is crucial to wash and oil UPVC windows and doors regularly. This will save you from costly repairs and increase energy efficiency.
1. Broken Glass
The broken glass in your windows can cause serious damage to your home and may even be fatal. You should take the time to ensure that your windows are in good working order.
For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the old panes. In this case you'll need to find some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.
Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any shards will fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.
It's a great idea tape the gap once the glass is removed. This will keep drafts and water from getting into your home until a professional arrives to fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap between the window and the door is large, you might want to use security screens that includes an opening. This will give you the best of both.
2. Sagging
Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues like sliding. A sagging window in uPVC can cause issues with light, draughts and even security. It is crucial to act when you notice your uPVC windows are sliding.
Repositioning the hinges can help fix a window that is sliding. You'll first need to open the windows so you can get at the frame. Then, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in the right place.
If you can't reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.
uPVC handles could also loosen. Most often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and perform an experiment fitting. The corner joints of the sash need to align with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.
3. Water Leaks
If you wake up to wet floors and damp walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.
It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the problem the caulking used previously may require removal before a new layer of caulk can be applied. When it comes to uPVC repair, you should be careful not to over-caulk. This will make your window more difficult to clean and reduce its energy efficiency.
It is essential to ensure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain here away from the window. In more extreme instances, you may need to replace the window.
Mold spots and rotten sills are also signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.
If the leakage occurs between the double-glazed glass, it is more likely the problem website is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges may be to blame when your uPVC window is difficult to open or if it blows open with the breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.
Like any mechanical part, hinges can be damaged over time. It is essentially a very simple process but it can be simpler with someone else to help you hold the frame in place.
It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.
Faulty window hinges could be caused by improperly opening the window in a particular way or due to improper installation in the factory. This issue can be fixed by sending us a picture through our website and we will be more than happy to give you suggestions.
Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also reduce the possibility of a window sticking and help prevent corrosion. It is recommended to perform this every year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.
5. Draughts
Draughts in windows made of upvc can be caused by different factors. The more info hinges can also be unbalanced due to wear, check here which can cause gaps where the sash meets frame. If they're beyond repair, it might be necessary to get them re-aligned. The interlock, which is located on the hinge side of the window and can be misaligned. Again, upvc windows repair it's possible to give them a clean but in certain cases, it may be necessary to have these replaced.
The next most common cause of draughts is the window seals. These are prone to wear or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the possibility of draughts.
Lastly, one of the most effective ways to reduce draughts is by using a draught excluder. These are typically made of fabric filled with some type of filler. They can be put on the top of your windowsill. These will help to block out cold air and keep your home warm and cozy!
Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it could be more cost-effective to replace them rather than repair them. If you encounter any issues with your Upvc window you should consult a professional as soon as you can.